P0613 Internal Transmission Processor
P0613 code - The Transmission Control Module (TCM) perform various internal tests to verify proper controller operation. If the TCM detects an error with controller processor, the controller will enter Limp-in mode and iluminate the MIL. When monitored this DTC continously with the ignition on. Set condition this DTC if the TCM detects an error with the controllers processor
Possible causes P0613 code
- Transmission Control Module (TCM)
Repair - Using the schematics as a guide, check the Transmission Control Module (TCM) terminals for corrosion, damage, or terminal push out. Pay particular attention to all power and ground circuits. If no problem are found, replace and program the Transmission Control Module (TCM). Perform the NAG1 Transmission Verification Test.
0 Response to "P0613 Internal Transmission Processor"
Post a Comment