P1636 TCM internal external watchdog performance
P1636 code - Theory of operation the transmission control module (TCM) performs Various internal tests to verify proper controller operation. This DTC indicates that watchdog circuitry external to the microprocessor has detected an error, the controller will enter limp in mode and illuminate the Mil.
When monitored continuously with the ignition on. Set condition if the TCM watchdog circuitry external to the microprocessor detects an error.
Possible causes :
- Transmission control module (TCM)
Transmission control module (TCM)
Repair, using the schematics as a guide, check the transmission control module (TCM) terminals for corrosion, damage, or terminal push out. Pay particular attention to all power and ground circuits. If no problems are found, replace the TCM in accordance with the service information. Perform NAG1 Transmission Verification Test.
0 Response to "P1636 TCM internal external watchdog performance "
Post a Comment